Collect. Czech. Chem. Commun. 2011, 76, 1509-1527
https://doi.org/10.1135/cccc2011166
Published online 2011-12-16 14:16:13

Assessment on the effects of the operational conditions on the manufacture of PLA-based composites using an integrated compounding–injection moulding machine

Daniel Gonzáleza,b, Ana Rita Camposc, Antonio M. Cunhad, Valentín Santosa,b,* and Juan Carlos Parajóa,b

a Chemical Engineering Department, Politechnical Building, Campus Ourense, University of Vigo, 32004 Ourense, Spain
b CITI, Investigation, Transfer and Innovation Center, Avda. Galicia No. 2, Parque Tecnolóxico de Galicia, San Cibrao das Viñas, 32900 Ourense, Spain
c PIEP – Innovation in Polymer Engineering, Campus de Azurém, 4800-058 Guimarães, Portugal
d IPC – Institute for Polymers and Composites, Department of Polymer Engineering, University of Minho, Campus de Azurém, 4800-058 Guimarães, Portugal

Individual author index pages


Other CCCC articles of these authors

  • María José Vázquez, José Luis Alonso, Herminia Domínguez and Juan Carlos Parajó*
    Production and Refining of Soluble Products from Eucalyptus globulus Glucuronoxylan
    2007, Vol. 72, Issue 3, pp. 307–320 [Abstract]
  • Severino Abad, Valentín Santos and Juan Carlos Parajó*
    Multistage Organosolv Pulping: A Method for Obtaining Pulps with Low Hemicellulose Contents
    2003, Vol. 68, Issue 6, pp. 1163–1174 [Abstract]
  • Carlos Vila, Gil Garrote, Herminia Domínguez and Juan Carlos Parajó*
    Hydrolytic Processing of Rice Husks in Aqueous Media: A Kinetic Assessment
    2002, Vol. 67, Issue 4, pp. 509–530 [Abstract]
  • Carlos Vila, Sonia Dapía, Valentín Santos and Juan Carlos Parajó*
    Deacetylation of Eucalyptus globulus Acetosolv Pulps in Aqueous Media: A Kinetic Study
    2001, Vol. 66, Issue 9, pp. 1443–1456 [Abstract]