Crossref Cited-by Linking logo

Collect. Czech. Chem. Commun. 1985, 50, 2903-2909
https://doi.org/10.1135/cccc19852903

Coke formation during the pyrolysis of hydrocarbons in the presence of sulphur compounds

Martin Bajus and Jozef Baxa

Department of Petroleum Chemistry and Technology, Faculty of Chemical Technology, Slovak Institute of Technology, 812 37 Bratislava

Crossref Cited-by Linking

  • dos S. Vargette L., Ristic N. D., Geerts M., Heynderickx G. J., Marin G. B., Van Geem K. M.: Determining the fouling tendency of different feedstocks in the Fouling Assessment Setup. Heat Mass Transfer 2023. <https://doi.org/10.1007/s00231-023-03396-2>
  • Mohamadzadeh Shirazi Hamed, Ghanbari Arezoo, Vermeire Florence, Reyniers Marie-Françoise, Van Geem Kevin M.: Carburization of High-Temperature Alloys during Steam Cracking: The Impact of Alloy Composition and Temperature. Ind. Eng. Chem. Res. 2023, 62, 2649. <https://doi.org/10.1021/acs.iecr.2c03599>
  • Karimi Hadiseh, Olayiwola Bolaji, Farag Hany, McAuley Kimberley B.: Modelling coke formation in an industrial ethane‐cracking furnace for ethylene production. Can J Chem Eng 2020, 98, 158. <https://doi.org/10.1002/cjce.23619>
  • Patil Manjunath, Sarris Stamatis A., Verbeken Kim, Reyniers Marie-Françoise, Van Geem Kevin M.: Catalytic Effect of Dimethyl Disulfide on Coke Formation on High-Temperature Alloys: Myth or Reality?. Ind. Eng. Chem. Res. 2020, 59, 15165. <https://doi.org/10.1021/acs.iecr.0c01693>
  • Geerts Moreno, Ristic Nenad, Djokic Marko, Ukkandath Aravindakshan Syam, Marin Guy B., Van Geem Kevin M.: Crude to Olefins: Effect of Feedstock Composition on Coke Formation in a Bench-Scale Steam Cracking Furnace. Ind. Eng. Chem. Res. 2020, 59, 2849. <https://doi.org/10.1021/acs.iecr.9b06702>
  • A. Sarris Stamatis, H. Symoens Steffen, Olahova Natalia, Reyniers Marie-Françoise, B. Marin Guy, M. Van Geem Kevin: Alumina-based Coating for Coke Reduction in Steam Crackers. Materials 2020, 13, 2025. <https://doi.org/10.3390/ma13092025>
  • Sarris Stamatis A., Verbeken Kim, Reyniers Marie-Françoise, Van Geem Kevin M.: Evaluation of a Ti–Base Alloy as Steam Cracking Reactor Material. Materials 2019, 12, 2550. <https://doi.org/10.3390/ma12162550>
  • Sarris Stamatis, Patil Manjunath, Verbeken Kim, Reyniers Marie-Françoise, Van Geem Kevin: Effect of Long-Term High Temperature Oxidation on the Coking Behavior of Ni-Cr Superalloys. Materials 2018, 11, 1899. <https://doi.org/10.3390/ma11101899>
  • Sarris Stamatis A., Olahova Natalia, Verbeken Kim, Reyniers Marie-Françoise, Marin Guy B., Van Geem Kevin M.: Optimization of the in Situ Pretreatment of High Temperature Ni–Cr Alloys for Ethane Steam Cracking. Ind. Eng. Chem. Res. 2017, 56, 1424. <https://doi.org/10.1021/acs.iecr.6b04537>
  • Van de Vijver Ruben, Vandewiele Nick M., Vandeputte Aäron G., Van Geem Kevin M., Reyniers Marie-Françoise, Green William H., Marin Guy B.: Rule-based ab initio kinetic model for alkyl sulfide pyrolysis. Chemical Engineering Journal 2015, 278, 385. <https://doi.org/10.1016/j.cej.2014.10.067>
  • Schietekat Carl M., Sarris Stamatis A., Reyniers Pieter A., Kool Lawrence B., Peng Wenqing, Lucas Patrick, Van Geem Kevin M., Marin Guy B.: Catalytic Coating for Reduced Coke Formation in Steam Cracking Reactors. Ind. Eng. Chem. Res. 2015, 54, 9525. <https://doi.org/10.1021/acs.iecr.5b02263>
  • Schietekat Carl M., van Goethem Marco W.M., Van Geem Kevin M., Marin Guy B.: Swirl flow tube reactor technology: An experimental and computational fluid dynamics study. Chemical Engineering Journal 2014, 238, 56. <https://doi.org/10.1016/j.cej.2013.08.086>
  • Venkataraman Ramya, Eser Semih: Characterization of Solid Deposits Formed from Short Durations of Jet Fuel Degradation: Carbonaceous Solids. Ind. Eng. Chem. Res. 2008, 47, 9337. <https://doi.org/10.1021/ie8010066>
  • Venkataraman Ramya, Eser Semih: Characterization of Solid Deposits Formed from Jet Fuel Degradation under Pyrolytic Conditions: Metal Sulfides. Ind. Eng. Chem. Res. 2008, 47, 9351. <https://doi.org/10.1021/ie801007r>
  • Hájeková Elena, Bajus Martin: Recycling of low-density polyethylene and polypropylene via copyrolysis of polyalkene oil/waxes with naphtha: product distribution and coke formation. APPL PYROLYSIS 2005, 74, 270. <https://doi.org/10.1016/j.jaap.2004.11.016>
  • Dhuyvetter Inge, Reyniers Marie-Françoise, Froment Gilbert F., Marin Guy B., Viennet Dominique: The Influence of Dimethyl Disulfide on Naphtha Steam Cracking. Ind. Eng. Chem. Res. 2001, 40, 4353. <https://doi.org/10.1021/ie001131b>
  • Ni T., Gupta S.B., Santoro R.J.: Suppression of soot formation in ethene laminar diffusion flames by chemical additives. Symposium (International) on Combustion 1994, 25, 585. <https://doi.org/10.1016/S0082-0784(06)80689-2>
  • Bajus Martin: Sulfur Compounds in Hydrocarbon Pyrolysis. Sulfur Reports 1989, 9, 25. <https://doi.org/10.1080/01961778908047982>